Каталог-справочник подшипников

Главная > Каталог импортных подшипников (FAG, INA, SKF, NSK и др.) > Подшипники шариковые радиальные

Подшипник шариковый радиальный KSP6A

Технические характеристики

Обозначение : KSP6A

Производитель : AST

Диаметр внутренний, мм : 9,525

Диаметр наружный, мм : 22,225

Технические данные из каталога производителя :

(размеры в дюймах)

Bearing Type - KSPxx

Bore Dia (d) - 0.3750

Outer Dia (D) - 0.8750

Outer Width (Bo) - 0.2500

Inner Width (Bi) - 0.3130

Dynamic Load Rating (Cr) - 990

Static Load Rating (Cor) - 1,120

Max. Shaft Shoulder Dia. Inner (Li) - 0.5

Ball Qty - 15

Ball Dia (Dw) - 0.1250

Max. shaft corner radius, or 45 deg. chamfer (ch1) - 0.016

Max. housing corner radius, or 45 deg. chamfer (ch) - 0.016

Material - 52100 Chrome steel or equivalent

The dynamic load rating given is for outer race rotation. The dynamic load rating for inner race rotation is 1120 pounds.

The static thrust load rating is 200 pounds.

The bore diameter tolerance is +.0000 / -.0005".

The outside diameter tolerance is +.0000" / -.0005".

The tolerance for the inner race width and the outer race width is +.000" / -.005"

The load ratings listed for these bearings are determined by the formulas used specifically for airframe bearings. These ratings are not equivalent to ratings calculated from the ABMA formulas used for most antifriction bearing products.

This bearing is intended for commercial applications. You must notify the AST sales department contact at the time of your inquiry if the bearing will be used in an airworthy application.

The bearing has two removable seals made of woven fabric Teflon.

Теги:  AST