Каталог-справочник подшипников

Главная > Каталог импортных подшипников (FAG, INA, SKF, NSK и др.) > Подшипники шариковые радиальные

Подшипник шариковый радиальный KSP3L

Технические характеристики

Обозначение : KSP3L

Производитель : AST

Диаметр внутренний, мм : 4,826

Диаметр наружный, мм : 15,875

Технические данные из каталога производителя :

(размеры в дюймах)

Bearing Type - KSPxx

Bore Dia (d) - 0.1900

Outer Dia (D) - 0.6250

Outer Width (Bo) - 0.2030

Inner Width (Bi) - 0.2450

Dynamic Load Rating (Cr) - 480

Static Load Rating (Cor) - 550

Max. Shaft Shoulder Dia. Inner (Li) - 0.3

Ball Qty - 13

Ball Dia (Dw) - 0.0930

Max. shaft corner radius, or 45 deg. chamfer (ch1) - 0.005

Max. housing corner radius, or 45 deg. chamfer (ch) - 0.016

Material - 52100 Chrome steel or equivalent

The dynamic load rating given is for outer race rotation. The dynamic load rating for inner race rotation is 550 pounds.

The static thrust load rating is 100 pounds.

The bore diameter tolerance is +.0000 / -.0005".

The outside diameter tolerance is +.0000" / -.0005".

The tolerance for the inner race width and the outer race width is +.000" / -.005"

The load ratings listed for these bearings are determined by the formulas used specifically for airframe bearings. These ratings are not equivalent to ratings calculated from the ABMA formulas used for most antifriction bearing products.

This bearing is intended for commercial applications. You must notify the AST sales department contact at the time of your inquiry if the bearing will be used in an airworthy application.

The bearing has two removable seals made of woven fabric Teflon.

Теги:  AST