Каталог-справочник подшипников

Главная > Каталог импортных подшипников (FAG, INA, SKF, NSK и др.) > Подшипники шариковые радиальные

Подшипник шариковый радиальный KP4

Технические характеристики

Обозначение : KP4

Производитель : AST

Диаметр внутренний, мм : 6,35

Диаметр наружный, мм : 22,89556

Технические данные из каталога производителя :

(размеры в дюймах)

Bearing Type - KPxx

Bore Dia (d) - 0.2500

Outer Dia (D) - 0.9014

Outer Width (Bo) - 0.3350

Inner Width (Bi) - 0.4840

Dynamic Load Rating (Cr) - 2,030

Static Load Rating (Cor) - 2,680

Max. Shaft Shoulder Dia. Inner (Li) - 0.4

Ball Qty - 11

Ball Dia (Dw) - 0.1560

Max. shaft corner radius, or 45 deg. chamfer (ch1) - 0.005

Max. housing corner radius, or 45 deg. chamfer (ch) - 0.032

Material - 52100 Chrome steel or equivalent

The dynamic load rating given is for outer race rotation. The dynamic load rating for inner race rotation is 2410 pounds.

The static thrust load rating is 1200 pounds.

The bore diameter tolerance is +.0000 / -.0005".

The outside diameter tolerance is +.0000" / -.0005".

The tolerance for the inner race width and the outer race width is +.000" / -.005"

The load ratings listed for these bearings are determined by the formulas used specifically for airframe bearings. These ratings are not equivalent to ratings calculated from the ABMA formulas used for most antifriction bearing products.

This bearing is intended for commercial applications. You must notify the AST sales department contact at the time of your inquiry if the bearing will be used in an airworthy application.

The bearing has two removable seals made of woven fabric Teflon.

Теги:  AST