Каталог-справочник подшипников

Главная > Каталог импортных подшипников (FAG, INA, SKF, NSK и др.) > Подшипники шариковые радиальные

Подшипник шариковый радиальный KP16A

Технические характеристики

Обозначение : KP16A

Производитель : AST

Диаметр внутренний, мм : 25,4

Диаметр наружный, мм : 50,8

Технические данные из каталога производителя :

(размеры в дюймах)

Bearing Type - KPxxA

Bore Dia (d) - 1.0000

Outer Dia (D) - 2.0000

Outer Width (Bo) - 0.4380

Inner Width (Bi) - 0.5000

Dynamic Load Rating (Cr) - 6,400

Static Load Rating (Cor) - 11,900

Max. Shaft Shoulder Dia. Inner (Li) - 1.2

Ball Qty - 19

Ball Dia (Dw) - 0.2500

Max. shaft corner radius, or 45 deg. chamfer (ch1) - 0.015

Max. housing corner radius, or 45 deg. chamfer (ch) - 0.032

Material - 52100 Chrome steel or equivalent

The dynamic load rating given is for outer race rotation. The dynamic load rating for inner race rotation is 7070 pounds.

The static thrust load rating is 5200 pounds.

The bore diameter tolerance is +.0000 / -.0005".

The outside diameter tolerance is +.0000" / -.0005".

The tolerance for the inner race width and the outer race width is +.000" / -.005"

The load ratings listed for these bearings are determined by the formulas used specifically for airframe bearings. These ratings are not equivalent to ratings calculated from the ABMA formulas used for most antifriction bearing products.

This bearing is intended for commercial applications. You must notify the AST sales department contact at the time of your inquiry if the bearing will be used in an airworthy application.

The bearing has two removable seals made of woven fabric Teflon.

Теги:  AST